Accreditation
Accredited paint and coating tests
NAH-1-1234/2024Easy to remember. Easy to verify.QUALILAKK is a testing laboratory accredited by the Hungarian National Accreditation Authority (NAH) in accordance with ISO 17025. The searchable list below covers our accredited laboratory and on-site tests, together with the related procedures.
Search by standard number, product or test
81 items
| Standard | Tested product | Accredited scope | Test / property |
|---|---|---|---|
| MSZ EN ISO 787-7:2010 | Pigments and extenders | Laboratory test | residue on sieve m/m%, smallest sieve size: 56 μm |
| MSZ ISO 787-5:1994 | Pigments and extenders | Laboratory test | determination of oil absorption value |
| MSZ EN ISO 9514:2019 | Paints and varnishes | Laboratory test | pot life |
| MSZ 9650-18:1979 | Paints and varnishes | Laboratory test | degree of levelling |
| MSZ 9650-23:1978 | Paints and varnishes | Laboratory test | degree of sagging |
| MSZ EN ISO 2431:2020 | Paints and varnishes | Laboratory test | flow time |
| DIN 53211:1987 | Paints and varnishes | Laboratory test | flow time |
| MSZ EN ISO 2555:2018 | Paints and varnishes | Laboratory test | viscosity with Brookfield viscometer, measuring range: 10–10⁶ mPas |
| MSZ 9650-22:1989 | Paints and varnishes | Laboratory test | hiding power, spreading rate |
| MSZ EN ISO 2811-1:2023 | Paints and varnishes | Laboratory test | density |
| MSZ EN ISO 3251:2019 | Paints and varnishes | Laboratory test | volatile and non-volatile matter content |
| MSZ EN ISO 3233-1:2020 | Paints and varnishes | Laboratory test | non-volatile matter content by volume |
| MSZ 9650-26:1982 | Paints and varnishes | Laboratory test | flash point determination with Abel-Pensky apparatus |
| MSZ 9650-8:1983 | Paints and varnishes | Laboratory test | determination of pigment-to-binder ratio |
| MSZ EN ISO 9117-5:2013 | Paints and varnishes | Laboratory test | drying test by Bandow-Wolff method |
| MSZ EN ISO 9117-3:2010 | Paints and varnishes | Laboratory test | drying test: surface-drying |
| MSZ EN ISO 9117-6:2013 | Paints and varnishes | Laboratory test | drying test: tack-free state |
| MSZ EN ISO 9117-1:2009 | Paints and varnishes | Laboratory test | drying test: through-dry state |
| MSZ 9650-24:1979 | Paints and varnishes | Laboratory test | recoatability |
| MSZ EN ISO 2808:2020 | Coatings, coating systems | On-site and laboratory test | wet film thickness measurement, measuring range: 10–1500 μm |
| MSZ EN ISO 2808:2020 | Coatings, coating systems | On-site and laboratory test | dry film thickness measurement, measuring range: 2–1500 μm, non-destructive method |
| MSZ EN ISO 11890-1:2008 | Paints and varnishes | Laboratory test | determination of volatile organic compounds (VOC) by calculation |
| MSZ EN ISO 2409:2021 | Coatings, coating systems | On-site and laboratory test | adhesion test by cross-cut |
| ASTM D 3359:2023 | Paint coatings and coating systems | Laboratory test | adhesion test by cross-cut |
| MSZ EN ISO 15184:2020 | Paint coatings and coating systems | Laboratory test | pencil hardness, measuring range: 6B–9H |
| MSZ 9640-41:1983 | Paint coatings and coating systems | Laboratory test | hardness determination with spring-loaded ball stylus, measuring range: 1–20 N |
| MSZ EN ISO 1518-1:2023 | Paint coatings and coating systems | Laboratory test | scratch test of coatings (type A) |
| MSZ EN ISO 1522:2023 | Paint coatings and coating systems | Laboratory test | hardness determination by pendulum damping |
| MSZ EN ISO 2815:2003 | Paint coatings and coating systems | Laboratory test | buchholz indentation hardness, measuring range: 0.1–2 mm |
| MSZ EN ISO 4624:2023 | Paint coatings and coating systems | On-site and laboratory test | pull-off test for adhesion, measuring range: 1–25 MPa |
| MSZ EN ISO 7784-2:2023 | Paint coatings and coating systems | Laboratory test | abrasion resistance with Taber Abraser (abrasive rubber wheel method) |
| MSZ 9619-2:1975 | Paint coatings and coating systems | Laboratory test | determination of X,Y,Z values, colour measurement (tristimulus) |
| MSZ EN ISO 11664-1:2020 | Paint coatings and coating systems | Laboratory test | determination of X,Y,Z tristimulus values, colour measurement (tristimulus), colour coordinates in the CIE L*,a*,b* colour space, colour measurement (spectrophotometric)(Colorimetric observers) |
| MSZ EN ISO 11664-2:2023 | Paint coatings and coating systems | Laboratory test | determination of X,Y,Z tristimulus values, colour measurement (tristimulus), colour coordinates in the CIE L*,a*,b* colour space, colour measurement (spectrophotometric)(Standard illuminants) |
| MSZ EN ISO 11664-3:2020 | Paint coatings and coating systems | Laboratory test | determination of X,Y,Z tristimulus values, colour measurement (tristimulus) |
| MSZ 9619-3.1975/1M:1978 | Paint coatings and coating systems | On-site and laboratory test | colour coordinates in the CIE L*,a*,b* colour space, colour measurement (spectrophotometric) |
| MSZ EN ISO 11664-4:2020 | Paint coatings and coating systems | Laboratory test | colour coordinates in the CIE L*,a*,b* colour space, colour measurement (spectrophotometric) |
| MSZ EN ISO 2813:2015 | Paint coatings and coating systems | Laboratory test | gloss measurement, measuring geometry: 20°, 60°, 85° |
| MSZ EN ISO 1519:2011 | Paint coatings and coating systems | Laboratory test | bend test flexibility, measuring range: 2–32 mm |
| MSZ EN ISO 1520:2007 | Paint coatings and coating systems | Laboratory test | cupping test flexibility, measuring range: 1–20 mm |
| MSZ EN ISO 6272-1:2012 | Paint coatings and coating systems | Laboratory test | impact resistance, measuring range: 5–100 cm |
| MSZ EN ISO 6272-2:2012 | Paint coatings and coating systems | Laboratory test | impact resistance, measuring range: 5–100 cm |
| MSZ EN ISO 20567-1:2017 | Paint coatings and coating systems | Laboratory test | stone-chip resistance |
| ASTM D 3170:2022 | Paint coatings and coating systems | Laboratory test | stone-chip resistance |
| MSZ EN ISO 11998:2006 | Paint coatings and coating systems | Laboratory test | cleanability, wash and scrub resistance |
| MSZ EN 13300:2001 | Paint coatings and coating systems | Laboratory test | classification of water-borne wall paints |
| MSZ EN ISO 29601:2011 | Coatings, coating systems | On-site and laboratory test | breakdown voltage, porosity (holiday) detection, measuring range: 1–12 kV |
| MSZ EN ISO 2812-1:2018 | Paint coatings and coating systems | Laboratory test | determination of resistance to liquids, immersion in liquids other than water |
| MSZ EN ISO 2812-2:2019 | Paint coatings and coating systems | Laboratory test | determination of resistance to liquids, water immersion |
| MSZ EN ISO 2812-3:2019 | Paint coatings and coating systems | Laboratory test | determination of resistance to liquids, absorbent medium method |
| MSZ EN ISO 2812-4:2018 | Paint coatings and coating systems | Laboratory test | determination of resistance to liquids, spotting method |
| MSZ 9640-16:1984 | Paint coatings and coating systems | Laboratory test | ageing under heat exposure |
| MSZ EN ISO 16474-1:2014 | Paint coatings and coating systems | Laboratory test | resistance to combined exposure to light and moisture (fluorescent UV, xenon-arc lamp)(General guidance) |
| MSZ EN ISO 16474-2:2014 | Paint coatings and coating systems | Laboratory test | resistance to combined exposure to light and moisture (xenon-arc lamp) |
| MSZ EN ISO 16474-3:2014 | Paint coatings and coating systems | Laboratory test | resistance to combined exposure to light and moisture (fluorescent UV) |
| MSZ EN ISO 9227:2023 | Paint coatings and coating systems | Laboratory test | corrosion protection testing in salt spray chamber (neutral salt spray) |
| MSZ EN ISO 6270-1:2018 | Paint coatings and coating systems | Laboratory test | determination of resistance to humidity (continuous condensation) |
| MSZ EN ISO 6270-2:2025 | Paint coatings and coating systems | Laboratory test | determination of resistance to humidity (condensation method)except the part on intermittent condensation |
| MSZ EN ISO 11997-1:2018 | Paint coatings and coating systems | Laboratory test | cyclic corrosion exposure |
| Volkswagen PV1210:2016 | Paint coatings and coating systems | Laboratory test | cyclic corrosion exposure |
| MSZ EN ISO 4628-1:2016 | Paint coatings and coating systems | Laboratory test | evaluation of corrosion tests: general introduction and designation system |
| MSZ EN ISO 4628-2:2016 | Paint coatings and coating systems | Laboratory test | evaluation of corrosion tests: blistering |
| ASTM D 714:2017 | Paint coatings and coating systems | Laboratory test | evaluation of corrosion tests: blistering |
| MSZ EN ISO 4628-3:2016 | Paint coatings and coating systems | Laboratory test | evaluation of corrosion tests: rusting |
| ASTM D 610:2019 | Paint coatings and coating systems | Laboratory test | evaluation of corrosion tests: rusting |
| MSZ EN ISO 4628-4:2016 | Paint coatings and coating systems | Laboratory test | evaluation of corrosion tests: cracking |
| MSZ EN ISO 4628-5:2023 | Paint coatings and coating systems | Laboratory test | evaluation of corrosion tests: flaking |
| MSZ EN ISO 4628-6:2024 | Paint coatings and coating systems | Laboratory test | evaluation of corrosion tests: chalking |
| MSZ EN ISO 4628-8:2013 | Paint coatings and coating systems | Laboratory test | evaluation of corrosion tests: delamination and corrosion around a scribe |
| MSZ EN ISO 8501-1:2008 | Metal surfaces | On-site test | assessment of surface cleanliness; rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings |
| MSZ EN ISO 8501-2:1997 | Metal surfaces | On-site test | assessment of surface cleanliness; preparation grades of previously coated steel substrates after localized removal of previous coatings |
| MSZ EN ISO 8501-3:2026 | Metal surfaces | On-site test | assessment of surface cleanliness; preparation grades of welds, edges and other areas with surface imperfections |
| MSZ EN ISO 8503-1:2012 | Metal surfaces | On-site test | determination of surface roughness by comparator procedure |
| MSZ EN ISO 8503-2:2012 | Metal surfaces | On-site test | determination of surface roughness by comparator procedure |
| MSZ EN ISO 8503-4:2012 | Metal surfaces | On-site test | determination of surface roughness by stylus instrument procedure, measuring range: 1–260 μm |
| MSZ EN ISO 16276-1:2025 | Coatings, coating systems | On-site test | assessment of adhesion/cohesion of the coating, part 1: pull-off testingexcept subclause 5.3 |
| MSZ EN ISO 16276-2:2025 | Coatings, coating systems | On-site test | assessment of adhesion/cohesion of the coating, part 2: cross-cut testing and X-cut testingexcept subclause 5.2 c) |
| MSZ EN ISO 1514:2024 | Paints, pigments, extenders, solvents, test panels, test specimens | Related procedure | standard panels for testingexcept Clause 16 |
| MSZ EN ISO 1513:2010 | Paints, pigments, extenders, solvents, test panels, test specimens | Related procedure | examination and preparation of samples for testing |
| MSZ EN 23270:1993 | Paints, pigments, extenders, solvents, test panels, test specimens | Related procedure | temperatures for conditioning and testing |
| MSZ EN ISO 17872:2020 | Paints, pigments, extenders, solvents, test panels, test specimens | Related procedure | guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing |
Custom and industry-specific testing
Beyond the NAH-accredited items, our instrumentation and know-how allow us to perform tests to customer-specific, manufacturer and automotive supplier requirements. These are outside the accredited scope, but are carried out according to standard methods and fully documented.
Found the test you need?
Send us the standard number or your question – we will quote price and lead time.